Polyester Modified Silicone Resin
| Chemical Name: | Polyester Modified Silicone Resin |
| Product Category: | Silicone Resin – Product |
| Appearance: | Colorless transparent to light yellow liquid. |
| Solid content %: | 50±1 |
| Viscosity s/T-4,25℃: | 25-75 |
| Drying time: | ≤2h/200℃ |
| Heat tolerance: | ＞200h/200℃ |
| Loss on heat 3h/250℃,%: | ≤3 |
Polyester Modified Silicone Resin Describe
Polyester modified silicone resin has good high temperature performance and water and moisture repellency as well as good electrical insulation properties, corona resistance, weathering resistance and chemical stability. The product has high hardness, high gloss, good fullness, and high yellowing resistance after full curing (up to 5H or more).
-
R3038A
-
R3046
-
R3072A
-
R3027
-
+More
Polyester modified silicone resin R-3038A
Resin properties and uses:
This product has good high temperature performance and water repellent and moisture resistant performance and good electrical insulation properties, arc corona resistance performance，weather resistance and chemical stability. This product has high hardness, high gloss, good fullness, high anti-yellowing performance after fully cured (more than 3H).
R-3038A widely use as high temperature resistant coating, recommended for electric rice cooker, oven, baking bread machine, electric iron, range hood, gas stove and other household electrical appliances, such as temperature resistant non-stick coating and special coating of basic resin.
Index：
Appearance: light yellow to colorless transparent liquid, allows light milk light, no mechanical impurities
Solid content：59±1%
Viscosity：350~1000 mPa.s (25℃)
Acid value：≤ 9mgKOH/g
Film Hardness：≥ 3H
Curing method：
This product uses the high temperature curing, 250℃ for 20 min; 270℃ for 15 min; 280℃ for 10 min.
Attentions：
a.The diluted solvent used for this product shall not contain water, pyridine and impurities containing sulfur compounds, otherwise it will affect the adhesion, dry and other properties of the resin paint film.。
b.This product in the processing process, there will be a large number of xylene and other flammable and explosive, toxic solvents volatile out, should pay attention to strengthen the field of ventilation, pay attention to fire, strictly avoid the fire source. Operator should pay attention to labor protection.
c.This product is used in the process of processing equipment, containers must be clean. To prevent dust and foreign bodies and mixed with water.
d.Acid, alkali, salt of organic acid and amine compounds have accelerated curing effect on this product, and affects heat resistance and electric properties. Therefore, this product should be kept in strict isolation from these substances.
Storage：
The product storage period is tentatively scheduled for half a year. This product should be stored in a cool, dry and ventilated place, prevent sun direct radiation; prevent the serious pollution of acid, alkali and should be cut off from the source of the fire and away from the heat source.
Package：
200/20KGS Iron Bucket.
Resin properties and uses:
This product has good high temperature performance and water repellent and moisture resistant performance and good electrical insulation properties, arc corona resistance performance，weather resistance and chemical stability. This product has high hardness, high gloss, good fullness, high anti-yellowing performance after fully cured (more than 3H).
R-3038A widely use as high temperature resistant coating, recommended for electric rice cooker, oven, baking bread machine, electric iron, range hood, gas stove and other household electrical appliances, such as temperature resistant non-stick coating and special coating of basic resin.
Index：
Appearance: light yellow to colorless transparent liquid, allows light milk light, no mechanical impurities
Solid content：59±1%
Viscosity：350~1000 mPa.s (25℃)
Acid value：≤ 9mgKOH/g
Film Hardness：≥ 3H
Curing method：
This product uses the high temperature curing, 250℃ for 20 min; 270℃ for 15 min; 280℃ for 10 min.
Attentions：
a.The diluted solvent used for this product shall not contain water, pyridine and impurities containing sulfur compounds, otherwise it will affect the adhesion, dry and other properties of the resin paint film.。
b.This product in the processing process, there will be a large number of xylene and other flammable and explosive, toxic solvents volatile out, should pay attention to strengthen the field of ventilation, pay attention to fire, strictly avoid the fire source. Operator should pay attention to labor protection.
c.This product is used in the process of processing equipment, containers must be clean. To prevent dust and foreign bodies and mixed with water.
d.Acid, alkali, salt of organic acid and amine compounds have accelerated curing effect on this product, and affects heat resistance and electric properties. Therefore, this product should be kept in strict isolation from these substances.
Storage：
The product storage period is tentatively scheduled for half a year. This product should be stored in a cool, dry and ventilated place, prevent sun direct radiation; prevent the serious pollution of acid, alkali and should be cut off from the source of the fire and away from the heat source.
Package：
200/20KGS Iron Bucket.
Polyester modified silicone resin R-3046
Resin properties and uses:
Polyester modified silicone resin Risso-3046 has excellent high temperature performance and water repellent and moisture resistant performance and good electrical insulation properties. Its weather resistance and chemical stability is also very good. This product can be dry in room temperature, It’ll have high hardness,good fullness, good gloss and color after complete curing (more than 1H).
R-3046 can widely in 250～500 ℃ high temperature paint and weather resistant coating.
Index：
Appearance: light yellow to colorless transparent liquid, allows light milk light, no mechanical impurities
Solid content：50±1%
Film Hardness：≥1H
Viscosity：70~150 seconds（No 4 cup）
Acid value：＜5ｍｇKOH/ｇ
Curing method：
The product can be dry in room temperature, This product uses the high temperature curing, 200℃ for 40 min; 250℃ for 20 min; 250℃ for 20 min. Addition of amino resin can shorten the curing time.
Attentions：
The diluted solvent used for this product shall not contain water, pyridine and impurities containing sulfur compounds, otherwise it will affect the adhesion, dry and other properties of the resin paint film.
This product is used in the process of processing equipment, containers must be clean. To prevent dust and foreign bodies and mixed with water.
This product in the processing process, there will be a large number of xylene and other flammable and explosive, toxic solvents volatile out, should pay attention to strengthen the field of ventilation, pay attention to fire, strictly avoid the fire source.
Operator should pay attention to labor protection. Acid, alkali, salt of organic acid and amine compounds have accelerated curing effect on this product, and affects heat resistance and electric properties. Therefore, this product should be kept in strict isolation from these substances.
Package：
200/20KGS Iron Bucket. The product storage period is tentatively scheduled for half a year. This product should be stored in a cool, dry and ventilated place, prevent sun direct radiation; prevent the serious pollution of acid, alkali and should be cut off from the source of the fire and away from the heat source.
Resin properties and uses:
Polyester modified silicone resin Risso-3046 has excellent high temperature performance and water repellent and moisture resistant performance and good electrical insulation properties. Its weather resistance and chemical stability is also very good. This product can be dry in room temperature, It’ll have high hardness,good fullness, good gloss and color after complete curing (more than 1H).
R-3046 can widely in 250～500 ℃ high temperature paint and weather resistant coating.
Index：
Appearance: light yellow to colorless transparent liquid, allows light milk light, no mechanical impurities
Solid content：50±1%
Film Hardness：≥1H
Viscosity：70~150 seconds（No 4 cup）
Acid value：＜5ｍｇKOH/ｇ
Curing method：
The product can be dry in room temperature, This product uses the high temperature curing, 200℃ for 40 min; 250℃ for 20 min; 250℃ for 20 min. Addition of amino resin can shorten the curing time.
Attentions：
The diluted solvent used for this product shall not contain water, pyridine and impurities containing sulfur compounds, otherwise it will affect the adhesion, dry and other properties of the resin paint film.
This product is used in the process of processing equipment, containers must be clean. To prevent dust and foreign bodies and mixed with water.
This product in the processing process, there will be a large number of xylene and other flammable and explosive, toxic solvents volatile out, should pay attention to strengthen the field of ventilation, pay attention to fire, strictly avoid the fire source.
Operator should pay attention to labor protection. Acid, alkali, salt of organic acid and amine compounds have accelerated curing effect on this product, and affects heat resistance and electric properties. Therefore, this product should be kept in strict isolation from these substances.
Package：
200/20KGS Iron Bucket. The product storage period is tentatively scheduled for half a year. This product should be stored in a cool, dry and ventilated place, prevent sun direct radiation; prevent the serious pollution of acid, alkali and should be cut off from the source of the fire and away from the heat source.
polyester modified silicone resin R-3072A
Product description
This product has good resistance to high and low temperature and water/moisture resistance. This product has high hardness (≥5H) and high gloss after fully cured.
Technical index
Appearance: Colorless to light yellow transparent liquid, no mechanical impurities
Viscosity, cst (closed 4 cup): 270-500
Solid content,%: 59±1
Curing conditions: Fully cured with 250°C for 20mins, 280°C for 10mins.
Acid value: 4-8mgKOH/g
Solvent: PMA
Application
It is widely used as the basic resin for temperature-resistant non-stick coatings and special decorative coatings for household appliances such as frying pans, rice cookers, ovens, toasters, electric irons, range hoods, gas stoves, etc.
Packaging, storage and transportation
1. This product is packed in 20/200kg iron drum;
2. This product should be stored in a ventilated, cool and dry place to prevent direct sunlight; prevent serious pollution of acid and lye, and should be isolated from fire and heat.
3. The shelf life is one year.
Product description
This product has good resistance to high and low temperature and water/moisture resistance. This product has high hardness (≥5H) and high gloss after fully cured.
Technical index
Appearance: Colorless to light yellow transparent liquid, no mechanical impurities
Viscosity, cst (closed 4 cup): 270-500
Solid content,%: 59±1
Curing conditions: Fully cured with 250°C for 20mins, 280°C for 10mins.
Acid value: 4-8mgKOH/g
Solvent: PMA
Application
It is widely used as the basic resin for temperature-resistant non-stick coatings and special decorative coatings for household appliances such as frying pans, rice cookers, ovens, toasters, electric irons, range hoods, gas stoves, etc.
Packaging, storage and transportation
1. This product is packed in 20/200kg iron drum;
2. This product should be stored in a ventilated, cool and dry place to prevent direct sunlight; prevent serious pollution of acid and lye, and should be isolated from fire and heat.
3. The shelf life is one year.
Polyester modified silicone resin R-3027
Product description
This product has excellent high and low temperature resistance and water/moisture resistance. After being fully cured, it has high hardness (≥3H), high gloss, and high temperature resistance to yellowing.
Technical index
Appearance: Colorless to light yellow transparent liquid, no mechanical impurities
Viscosity, cst (closed 4 cup): 40-80
Solid content,%: 50±1
Curing conditions: quickly surface dry at room temperature and fully cured with 250℃ for 20mins.
Heat resistance (varnish sheet) Tinplate sheet (200℃): ≥200h
Acid value: 4-7mgKOH/g
Solvent: xylene/CAC
Application
It is widely used as room temperature cured high temperature resistant paint (about 250-550℃), weather resistant paint, decorative paint, etc., has good gloss and color retention.
Packaging, storage and transportation
1. This product is packed in 20/200kg iron drum;
2. This product should be stored in a ventilated, cool and dry place to prevent direct sunlight; prevent serious pollution of acid and lye, and should be isolated from fire and heat.
3. The shelf life is one year.
Product description
This product has excellent high and low temperature resistance and water/moisture resistance. After being fully cured, it has high hardness (≥3H), high gloss, and high temperature resistance to yellowing.
Technical index
Appearance: Colorless to light yellow transparent liquid, no mechanical impurities
Viscosity, cst (closed 4 cup): 40-80
Solid content,%: 50±1
Curing conditions: quickly surface dry at room temperature and fully cured with 250℃ for 20mins.
Heat resistance (varnish sheet) Tinplate sheet (200℃): ≥200h
Acid value: 4-7mgKOH/g
Solvent: xylene/CAC
Application
It is widely used as room temperature cured high temperature resistant paint (about 250-550℃), weather resistant paint, decorative paint, etc., has good gloss and color retention.
Packaging, storage and transportation
1. This product is packed in 20/200kg iron drum;
2. This product should be stored in a ventilated, cool and dry place to prevent direct sunlight; prevent serious pollution of acid and lye, and should be isolated from fire and heat.
3. The shelf life is one year.
For more Class A Polyester Modified Silicone Resin, you can consult online or leave us a message. If you need to customize the corresponding Class A Polyester Modified Silicone Resin, RissoChem can also customize it as required.
Packaging Specifications
Jessica G.
Get in touch to Get
- Quick and helpful reply within 8 hours;
- Tailored solutions provided for your project;
- One-stop purchasing service.
Polyester Modified Silicone Resin : Guide
Polyester modified silicone resin can be widely used in high temperature coatings, anti-fouling coatings, anti-graffiti coatings, kitchen appliances, non-stick coatings, iron coatings, hairpin coatings and special coatings (such as replacement of PVDF, fluorocarbon coatings)), such as the base resin.
Curing mode: The product can be self-drying at room temperature with good dryness; the product is cured at high temperature with better hardness.
The best suggestion is: 220°C, 30 minutes; 250°C, 15 minutes; 280°C 10 minutes. Adding 10~15% (relative to R-3072A) of amino resin can get better performance, but it may cause slight yellowing at high temperature.
Curing mode: The product can be self-drying at room temperature with good dryness; the product is cured at high temperature with better hardness.
The best suggestion is: 220°C, 30 minutes; 250°C, 15 minutes; 280°C 10 minutes. Adding 10~15% (relative to R-3072A) of amino resin can get better performance, but it may cause slight yellowing at high temperature.
